INA129P vs INA128P तुलना
विस्तृत दोनों ओर की तुलना INA129P द्वारा Texas Instruments और INA128P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | INA129P | INA128P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Precision low-power instrumentation amplifier | Precision instrumentation amplifier |
| Amplifier Circuit Count | 1 | — |
| पैकेज | 8-pin plastic DIP (PDIP) | 8-pin plastic DIP (PDIP) |
| माउंटिंग प्रकार | Through-hole | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | ±40 V |
| Supply Voltage Range | ±18 V | ±2.25 V to ±18 V |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp instrumentation amplifier |
| Gain Adjustment | Single external resistor | — |
| Gain Range | 1 to 10,000 | — |
| Temperature Range | -40°C to +85°C | — |
| Low-Power Feature | Low-power instrumentation-amplifier design | — |
| Current Feedback | Yes | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Common-Mode Rejection Ratio | — | 130 dB minimum |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| क्वाइसेंट करंट | — | 700 µA |
| Bandwidth | — | 1.3 MHz |
| Slew Rate | — | 4 V/µs |
| ऑपरेटिंग तापमान | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |