INA129U vs INA129UA तुलना

विस्तृत दोनों ओर की तुलना INA129U द्वारा Texas Instruments और INA129UA द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
INA129U INA129U - ±18V Precision Instrumentation Amp | Texas Instruments

INA129U - ±18V Precision Instrumentation Amp | Texas Instruments

INA129U ✓ सक्रिय
Texas Instruments
INA129UA INA129UA - Precision Instrumentation Amplifier | Texas Instruments

INA129UA - Precision Instrumentation Amplifier | Texas Instruments

INA129UA ✓ सक्रिय

विशेषता तुलना

पैरामीटर INA129U INA129UA
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Precision, low-power instrumentation amplifier —
Architecture Three-op-amp instrumentation amplifier —
Supply Range ±2.25 V to ±18 V —
Maximum Supply ±18 V —
Gain-Bandwidth Product 1.3 MHz —
Bandwidth at G = 100 200 kHz —
Maximum Offset Voltage 50 µV —
Maximum Offset Drift 0.5 µV/°C —
Maximum Input Bias Current 5 nA —
Minimum Common-Mode Rejection 120 dB —
Input Protection ±40 V differential inputs —
Gain Range 1 to 10,000 —
Gain-Setting Resistor 49.4 kΩ reference resistor —
ऑपरेटिंग तापमान रेंज -40°C to +85°C -40 °C to +125 °C
पैकेज 8-pin SOIC 8-pin SOIC (D)
Circuit Count 1 amplifier —
क्वाइसेंट करंट [DATA_NEEDED: low quiescent current value] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Amplifier Type — Precision instrumentation amplifier
Number of Amplifier Circuits — 1 circuit
Input Offset Voltage — 50 µV maximum
Input Offset Voltage Drift — 0.5 µV/°C maximum
Input Bias Current — 5 nA maximum
Common-Mode Rejection Ratio — 120 dB minimum
Input Protection Range — ±40 V
Supply Voltage Range — ±18 V maximum
Minimum Total Supply Voltage — 4.5 V
Maximum Gain — 10,000 V/V
Minimum Gain — 1 V/V
Gain Setting — Single external resistor
Bandwidth at Gain 100 — 200 kHz
Input Noise at 1 kHz — 8 nV/√Hz typical
माउंटिंग प्रकार — Surface mount
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध