IR2128SPBF vs IRS21867STRPBF तुलना
विस्तृत दोनों ओर की तुलना IR2128SPBF द्वारा Infineon और IRS21867STRPBF द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | IR2128SPBF | IRS21867STRPBF |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Driver Type | High-Side, Low-Side (Half-Bridge), Inverting | — |
| Number of Channels | 1 | — |
| Output Current | 0.5 A | — |
| Maximum Offset Voltage | 600 V | — |
| Supply Voltage Range | 10 V to 20 V | — |
| Propagation Delay | 150 ns (typical) | — |
| Logic Input Compatibility | CMOS / LSTTL (down to 3.3 V) | — |
| Gate Drive Range (Motor Drive) | 20 V (IR2127/IR2128) | — |
| dV/dt Immunity | Yes | — |
| Negative Transient Tolerance | Yes | — |
| Technology | HVIC and latch-immune CMOS | — |
| Current Sensing | Integrated (single channel) | — |
| ऑपरेटिंग तापमान | -40 C to +125 C | — |
| पैकेज | 8-SOIC (PDSO8) | 8-SOIC (SOIC-8, 8-pin SOIC N T/R) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Lead-Free / RoHS | Yes (PbF suffix) | — |
| Configuration | Inverting input | — |
| टोपोलॉजी | — | High-Side and Low-Side (Half-Bridge) |
| Offset Voltage (High-Side, max) | — | 600 V |
| Output Current (Source/Sink, typical) | — | 4 A / 4 A |
| Supply Voltage VCC | — | 10 V to 20 V |
| Bootstrap Supply VBS | — | up to VCC + 600 V (floating) |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS / TTL |
| Rise Time (typ, 1 nF load) | — | 22 ns |
| Fall Time (typ, 1 nF load) | — | 18 ns |
| Turn-On Propagation Delay (typ) | — | 170 ns |
| Turn-Off Propagation Delay (typ) | — | 170 ns |
| Undervoltage Lockout | — | Yes (VCC and VBS) |
| Operating Temperature Range (TJ) | — | -40C to +150C |
| MSL स्तर | — | 2 |
| RoHS स्थिति | — | Compliant |
| Lead-Free Status | — | Lead Free |
| Channel Count | — | 2 (1 high-side + 1 low-side) |
| Input Type | — | Non-Inverting (HIN, LIN) |