ISO1042BDW vs TJA1052IT-1Y तुलना
विस्तृत दोनों ओर की तुलना ISO1042BDW द्वारा Texas Instruments और TJA1052IT-1Y द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ISO1042BDW - Isolated CAN Transceiver, 5Mbps, ±70V Bus Fault | TI
ISO1042BDW ✓ सक्रियNXP Semiconductors
TJA1052IT-1Y - Galvanically Isolated HS CAN Transceiver | NXP
TJA1052IT-1Y ✓ सक्रियविशेषता तुलना
| पैरामीटर | ISO1042BDW | TJA1052IT-1Y |
|---|---|---|
| ब्रांड | Texas Instruments | NXP Semiconductors |
| श्रेणी | Voltage Regulators | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Protocol | CAN, CAN FD | CAN 2.0A, CAN 2.0B |
| Number of Transceivers | 1 | — |
| डेटा दर | 5 Mbps (CAN FD) | — |
| Isolation Voltage | 5000 VRMS | 1 kV (channel rating) |
| Bus Fault Protection | ±70 V DC | -27 V to +40 V on CANH/CANL (typical for the family) |
| Common-Mode Voltage Range | ±30 V | — |
| Supply Voltage (VCC1) | 1.8 V to 5.5 V | — |
| Supply Voltage (VCC2) | 4.5 V to 5.5 V | — |
| ऑपरेटिंग तापमान | -40C to +125C | -40 C to +125 C (automotive) |
| पैकेज | 16-SOIC (DW) Wide-Body | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| पिन काउंट | 16 | — |
| ESD Protection | [DATA_NEEDED: ESD HBM/CDM rating] | — |
| RoHS स्थिति | Compliant | Compliant |
| Compliance | ISO 11898-2 (2016) | — |
| फ़ंक्शन | — | Galvanically isolated high-speed CAN transceiver |
| Data Rate (max) | — | 1 Mbit/s |
| Standards Compliance | — | ISO 11898-2, ISO 11898-5 |
| Number of Channels | — | 2 (TXD / RXD across isolation) |
| Supply Voltage - Logic Side | — | [DATA_NEEDED: VCC1 supply range] |
| Supply Voltage - Bus Side | — | [DATA_NEEDED: VCC2 supply range] |
| पैकेज / केस | — | 16-SOIC (SOT-109 / SO-16) |
| Target Application | — | Electric Vehicle (EV), Hybrid Electric Vehicle (HEV) |
| Duplex | — | Half |
| Receiver Hysteresis | — | Yes (per ISO 11898-2/-5) |
| Lead Free | — | Yes |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |