ISO122JU vs ISO124U तुलना
विस्तृत दोनों ओर की तुलना ISO122JU द्वारा Texas Instruments और ISO124U द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ISO122JU - 50kHz Precision Isolation Amplifier | Texas Instruments
ISO122JU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ISO122JU | ISO124U |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Precision isolation amplifier | Precision isolation amplifier |
| Number of Isolation Channels | 1 channel | — |
| Signal Bandwidth | 50 kHz | 50 kHz |
| Maximum Nonlinearity | 0.020% | 0.010% |
| Input-Offset-Voltage Drift | 200 V/°C | — |
| Power Supply Range | 4.5 V to 18 V | — |
| VS1 Quiescent Current | 5 mA | ±5 mA |
| VS2 Quiescent Current | ±5.5 mA | ±5.5 mA |
| Nominal Gain | Unity gain | — |
| Isolation Architecture | Input section and output section galvanically isolated by matched 1 pF capacitors | — |
| Internal Isolation Capacitors | 1 pF | — |
| पैकेज | 8-pin SOIC | 8-pin SOIC (DVA) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| High-Voltage Breakdown Rating | 1500 Vrms | — |
| External Components Required for Operation | None | — |
| Bipolar Operation | ±10 V | — |
| High-Voltage Breakdown Test | 100% tested | — |
| Moisture Sensitivity Level | MSL 3 | — |
| इनपुट वोल्टेज रेंज | — | ±10 V |
| Input Offset Voltage Drift | — | 200 µV/°C |
| Supply Voltage Range | — | ±4.5 V to ±18 V |
| Gain Configuration | — | Fixed unity gain |
| Operating Mode | — | Bipolar |
| Isolation Barrier | — | 2-pF differential capacitive barrier |
| Isolation Method | — | Duty-cycle modulation-demodulation |
| ऑपरेटिंग तापमान | — | -25°C to +85°C |
| High-Voltage Testing | — | 100% tested for high-voltage breakdown |
| Isolation Rating | — | 1500 Vrms rated |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |