ISO124P vs ISO122JPE4 तुलना
विस्तृत दोनों ओर की तुलना ISO124P द्वारा Texas Instruments और ISO122JPE4 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ISO124P - 8-Pin DIP Isolation Amplifier, 1.5kV | Texas Instruments
ISO124P ✓ सक्रियTexas Instruments
ISO122JPE4 - Precision Isolation Amplifier | Texas Instruments
ISO122JPE4 ✓ सक्रियविशेषता तुलना
| पैरामीटर | ISO124P | ISO122JPE4 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Isolation Voltage (Rated) | 1500 Vrms | — |
| Isolation Barrier Type | Capacitive (matched 1 pF differential) | — |
| Modulation Technique | Duty-cycle modulation/demodulation | — |
| Number of Channels | 1 | — |
| इनपुट वोल्टेज रेंज | ±10 V (bipolar) | — |
| Supply Voltage Range (each side) | ±4.5 V to ±18 V | — |
| Quiescent Current (V_S1) | ±5 mA | — |
| Quiescent Current (V_S2) | ±5.5 mA | — |
| Bandwidth (Small Signal) | 50 kHz | — |
| Nonlinearity (Max) | 0.010% max | — |
| Input Offset Voltage Drift | 200 uV/°C max | — |
| Common-Mode Rejection (CMR) | 140 dB typical | — |
| Gain Configuration | Fixed unity gain (1 V/V) | — |
| पैकेज | 8-pin PDIP (P) | 8-PDIP (16-DIP mechanical outline, 8 leads) |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| ऑपरेटिंग तापमान | -25°C to +85°C | — |
| RoHS स्थिति | Compliant (lead-free finish) | [DATA_NEEDED: RoHS status] |
| Product Type | — | Precision isolation amplifier |
| Number of Amplifier Channels | — | 1 circuit |
| Input Signal Range | — | 50 mV |
| Bandwidth | — | 50 kHz |
| Isolation Voltage | — | 1.5 kV |
| Supply Voltage Range | — | 4.5 V to 18 V |
| Isolation Technology | — | Duty-cycle modulation-demodulation |
| Isolation Barrier | — | 2 pF differential capacitive barrier |
| Signal Transmission Across Barrier | — | Digital |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Isolation Mode | — | [DATA_NEEDED: isolation mode] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | not_applicable |