ISO1450DW vs ISO1430DWR तुलना
विस्तृत दोनों ओर की तुलना ISO1450DW द्वारा Texas Instruments और ISO1430DWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ सक्रियविशेषता तुलना
| पैरामीटर | ISO1450DW | ISO1430DWR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Isolated RS-485/RS-422 transceiver | Galvanically isolated half-duplex RS-485 and RS-422 transceiver |
| Transceiver Configuration | 1/1 half-duplex | 1 transmitter and 1 receiver |
| Maximum Data Rate | 50 Mbps | 12 Mbps |
| Isolation Voltage | 5 kVrms | — |
| Supply Voltage Range | 1.71 V to 5.5 V | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to 125 °C | -40°C to +125°C |
| पैकेज | 16-pin SOIC wide-body (DW) | 16-pin SOIC (DW) |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Supported Standards | TIA/EIA RS-485 and RS-422 | — |
| Differential Communication | Yes | — |
| Direction Control | Half-duplex | — |
| EMC Protection | EMC protected | Protected against ESD and EFT bus events |
| Isolation Type | Galvanic isolation | — |
| Logic Compatibility | 1.71 V to 5.5 V supply operation | — |
| Manufacturer Evaluation Module | ISO1410DWEVM for related ISO1410 evaluation | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Isolation Rating | — | 5 kVrms |
| Duplex Mode | — | Half-duplex |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| Logic Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: common-mode transient immunity] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |
| EFT Protection Rating | — | [DATA_NEEDED: EFT protection rating] |
| Isolation Capacitance | — | [DATA_NEEDED: isolation capacitance] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |