ISP752TFUMA1 vs BTS70402EPGXUMA1 तुलना

विस्तृत दोनों ओर की तुलना ISP752TFUMA1 द्वारा Infineon और BTS70402EPGXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
ISP752TFUMA1 ISP752TFUMA1 - 1.3A Smart High-Side Switch 200mOhm 6-52V | Infineon

ISP752TFUMA1 - 1.3A Smart High-Side Switch 200mOhm 6-52V | Infineon

ISP752TFUMA1 ✓ सक्रिय
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर ISP752TFUMA1 BTS70402EPGXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch —
Series PROFET™ Industrial —
Switch Configuration 1:1 (Single channel) —
आउटपुट कॉन्फ़िगरेशन High-Side High-side, N-channel MOSFET
आउटपुट प्रकार N-Channel —
On-Resistance (Ron) 200 mOhm —
Continuous Load Current 1.3 A —
ऑपरेटिंग सप्लाई वोल्टेज 6 V to 52 V —
Input Type Non-Inverting (logic-level) —
ऑपरेटिंग तापमान -30 C to +85 C —
पैकेज / केस PG-DSO-8-24 (DSO-8 with exposed pad) —
माउंटिंग प्रकार Surface Mount Surface Mount
Fault Protection Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage —
Diagnostic Output Status flag —
RoHS स्थिति Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
फ़ंक्शन — Smart High-Side Power Switch
Number of Channels — 4
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Protection Features — Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Interface — SPI status register, current-sense feedback
ऑपरेटिंग तापमान रेंज — -40 °C to +150 °C junction
पैकेज — PG-TSDSO-14 (exposed thermal pad)
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध