KSZ8041TL-TR vs KSZ8041TL-S तुलना

विस्तृत दोनों ओर की तुलना KSZ8041TL-TR द्वारा Microchip Technology और KSZ8041TL-S द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Microchip Technology
KSZ8041TL-TR KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)

KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)

KSZ8041TL-TR ✓ सक्रिय
Microchip Technology
KSZ8041TL-S KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S ✓ सक्रिय

विशेषता तुलना

पैरामीटर KSZ8041TL-TR KSZ8041TL-S
ब्रांड Microchip Technology Microchip Technology
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver —
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver 10/100BASE-TX Ethernet physical-layer transceiver
पैकेज 48-TQFP (7 x 7 mm) 48-TQFP, 7 mm x 7 mm
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई वोल्टेज [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Supply Voltage Range — 3.135 V to 3.465 V
Supply Configuration — Single supply
Supported Copper Ethernet Rates — 10BASE-T and 100BASE-TX
Host Interface — MII, RMII, and SMII
Target Packaging — Tray
Signaling Design — Mixed-signal design
100BASE-FX Support — Not supported in KSZ8041TL-S
Maximum Ethernet Data Rate — 100 Mbit/s
Minimum Ethernet Data Rate — 10 Mbit/s
AEC-Q100 Qualification — Not applicable
Automotive MDI/MDIX Support — [DATA_NEEDED: automotive MDI/MDIX support]
Media Interface — Copper Ethernet through external magnetics
Configuration Mechanism — Power-up PHY strapping pins

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध