KSZ8051RNL vs KSZ8041RNL तुलना

विस्तृत दोनों ओर की तुलना KSZ8051RNL द्वारा Microchip Technology और KSZ8041RNL द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Microchip Technology
KSZ8051RNL KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL ✓ सक्रिय
Microchip Technology
KSZ8041RNL KSZ8041RNL - 10/100BASE-TX RMII PHY | Microchip Technology

KSZ8041RNL - 10/100BASE-TX RMII PHY | Microchip Technology

KSZ8041RNL ✓ सक्रिय

विशेषता तुलना

पैरामीटर KSZ8051RNL KSZ8041RNL
ब्रांड Microchip Technology Microchip Technology
श्रेणी Ethernet PHYs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver 10BASE-T/100BASE-TX physical-layer transceiver
Manufacturer Microchip Technology —
Supported Ethernet Speeds 10 Mbps and 100 Mbps —
MAC Interface RMII —
Supply Type Single supply —
Nominal Supply Voltage 3.3 V —
पैकेज 32-pin QFN, 5 mm x 5 mm 32-VFQFN exposed-pad package, 5 mm x 5 mm
माउंटिंग प्रकार Surface mount Surface mount
Automotive Qualification AEC-Q100 standard qualified —
Termination 10BASE-T on-chip termination resistors —
Management Interface MDC/MDIO management —
RMII Reference Clock 50 MHz —
पिन काउंट 32 pins —
Lead Finish Lead-free —
Ethernet Cable Type Twisted-pair 10BASE-T/100BASE-TX —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Maximum Data Rate 100 Mbps —
Ethernet Data Rate — 10 Mb/s and 100 Mb/s
Host Interface — Full RMII
Number of Drivers/Receivers — 1/1
Supply Voltage Range — 3.135 V to 3.465 V
Supply Configuration — Single supply
Input Reference Clock — 25 MHz crystal
RMII Reference Output — 50 MHz to the media access controller
External 50 MHz System Clock — Not required for the RNL version
Lead-Free Package Option — Yes, 32-pin lead-free QFN package
Power-Down Configuration — Configurable through power-up strapping
Speed and Duplex Configuration — Configurable through power-up strapping
Auto-Negotiation Configuration — Configurable through power-up strapping
PHY Address Configuration — Configurable through power-up strapping
Ethernet Magnetics — External 10/100BASE-TX magnetic isolation required

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध