LM258DR2G vs LM2904PWR तुलना
विस्तृत दोनों ओर की तुलना LM258DR2G द्वारा onsemi और LM2904PWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ सक्रियविशेषता तुलना
| पैरामीटर | LM258DR2G | LM2904PWR |
|---|---|---|
| ब्रांड | onsemi | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Number of Amplifier Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 32 V | — |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| ऑपरेटिंग तापमान रेंज | -25°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Typical Supply-Current Drain | 0.7 mA | — |
| Typical Input Offset Voltage | 2 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Input Bias Current | 15 nA | — |
| Differential Input Voltage Range | 32 V | — |
| Common-Mode Input Range | Extends to ground and VEE | Includes ground |
| Compensation | Internal frequency compensation | — |
| Supply Configuration | Single supply or split supply | — |
| पैकेज | 8-pin SOIC | 8-TSSOP, 4.40 mm width |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Product Classification | General-purpose operational amplifier | — |
| RoHS स्थिति | ROHS3 compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Moisture Sensitivity Level | MSL 1 (unlimited) | — |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |