LM2901DG vs LM2901VDG तुलना
विस्तृत दोनों ओर की तुलना LM2901DG द्वारा onsemi और LM2901VDG द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM2901DG | LM2901VDG |
|---|---|---|
| ब्रांड | onsemi | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Comparator Type | General Purpose | General-purpose differential comparator |
| Number of Comparators | 4 | — |
| Single-Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | ±1.5 V to ±18 V |
| Response Time | 1.3 us | [DATA_NEEDED: comparator response time] |
| आउटपुट प्रकार | Open Collector | Open-collector, CMOS and TTL compatible |
| Output Compatibility | CMOS, TTL | — |
| सप्लाई करंट | 1 mA | — |
| Maximum Input Bias Current | 0.25 uA at 5 V | — |
| Typical Low Input Bias Current | 25 nA | — |
| Typical Input Offset Current | ±5 nA | — |
| Typical Low Output Saturation Voltage | 130 mV at 4 mA | — |
| ऑपरेटिंग तापमान रेंज | -40°C to +105°C | -40°C to +125°C |
| पैकेज | 14-SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Number of Channels | — | 4 channels |
| Tested Maximum Supply Voltage | — | 30 V |
| Input Offset Voltage | — | 2 mV |
| Input Bias Current | — | 25 nA |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |