LM2902PWRE4 vs LM2902PWRG3 तुलना

विस्तृत दोनों ओर की तुलना LM2902PWRE4 द्वारा Texas Instruments और LM2902PWRG3 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
LM2902PWRE4 LM2902PWRE4 - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments

LM2902PWRE4 - Quad 26V 1.2MHz Op-Amp TSSOP-14 | Texas Instruments

LM2902PWRE4 ✓ सक्रिय
Texas Instruments
LM2902PWRG3 LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 ✓ सक्रिय

विशेषता तुलना

पैरामीटर LM2902PWRE4 LM2902PWRG3
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Amplifier Channels 4 —
Gain Bandwidth Product 1.2 MHz —
Input Offset Voltage 2 mV 2 mV
Supply Voltage Range (Single) 3 V to 26 V —
Supply Voltage (Dual) +/-13 V —
पैकेज 14-TSSOP (PW) 14-pin TSSOP (PW), 4.40 mm width
माउंटिंग प्रकार Surface Mount Surface mount
Packaging Tape & Reel (PWR) Tape and reel (TR)
Amplifier Type General Purpose General-purpose
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] —
Slew Rate [DATA_NEEDED: slew rate] 0.5 V/µs
Input Bias Current [DATA_NEEDED: input bias current] —
Quiescent Current (per amp) [DATA_NEEDED: quiescent current] —
Output Current per Channel [DATA_NEEDED: output current] —
RoHS स्थिति Compliant (E4 suffix denotes lead-free) unknown
Product Series LM2902 —
Drop-in Upgrade Path LM2902B / LM324B (3V to 36V, lower offset) —
Number of Amplifiers — 4 amplifiers
Maximum Supply Voltage — 26 V
Gain-Bandwidth Product — 1.2 MHz
Supply Current Drain — 0.8 mA typical
Supply Configuration — Single supply or split supply
Lead Pitch — 0.65 mm
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Open-Loop Gain — [DATA_NEEDED: open-loop gain]
Unity-Gain Bandwidth — [DATA_NEEDED: unity-gain bandwidth]
REACH Status — unknown
AEC-Q100 Qualification — not_applicable

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध