LM2904QDRQ1 vs LM2904VQDRQ1 तुलना
विस्तृत दोनों ओर की तुलना LM2904QDRQ1 द्वारा Texas Instruments और LM2904VQDRQ1 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM2904QDRQ1 | LM2904VQDRQ1 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| यूनिट मूल्य (USD) | $0.22 | — |
| Number of Channels | 2 | 2 channels |
| Supply Voltage Range (single) | 3 V to 26 V | — |
| Supply Voltage Range (dual) | ±1.5 V to ±13 V | — |
| Gain-Bandwidth Product | 700 kHz (typ) | 700 kHz |
| Slew Rate | 0.3 V/us (typ) | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 2 mV (typ), 7 mV (max) | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 20 nA (typ) | [DATA_NEEDED: input bias current] |
| Supply Current per Amplifier | 500 uA (typ) | — |
| Common-Mode Input Range | Includes ground (V-) | — |
| Output | Swings close to negative rail, not rail-to-rail | — |
| ESD Rating (HBM) | Exceeds 500 V (MIL-STD-883 Method 3015) | — |
| ESD Rating (MM) | 200 V | — |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 qualified |
| ऑपरेटिंग तापमान | -40C to +125C | — |
| पैकेज | SOIC-8 (D) | 8-pin SOIC, 3.90 mm width |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Protection | Output short-circuit protection, internal frequency compensation | — |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Total Supply Voltage | — | 30 V |
| Maximum Supply Voltage | — | 32 V |
| ऑपरेटिंग तापमान रेंज | — | -40°C to +125°C |
| लाइफसाइकिल स्थिति | — | Active |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| नॉइज़ डेंसिटी | — | [DATA_NEEDED: input voltage noise density] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |