LM324DT vs LM324NS तुलना
विस्तृत दोनों ओर की तुलना LM324DT द्वारा STMicroelectronics और LM324NS द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM324DT | LM324NS |
|---|---|---|
| ब्रांड | STMicroelectronics | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Number of Channels | 4 | — |
| Supply Voltage (Single) | 3 V to 32 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±16 V | — |
| Supply Current (per Amplifier) | 700 µA typical | — |
| Input Offset Voltage | 2 mV typical | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 20 nA typical | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | 1.3 MHz typical | — |
| Slew Rate | 0.4 V/µs typical | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio | 80 dB typical | — |
| Output Current | 40 mA typical | [DATA_NEEDED: output current capability] |
| ऑपरेटिंग तापमान रेंज | 0°C to +70°C | [DATA_NEEDED: operating temperature range] |
| पैकेज | SOIC-14 | 14-pin SOIC (14-SO) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| RoHS स्थिति | Compliant | — |
| Amplifier Type | General Purpose | — |
| Number of Amplifier Circuits | — | 4 circuits |
| Device Type | — | Standard general-purpose operational amplifier |
| Supply Configuration | — | Single supply |
| Supply Current Drain | — | 0.8 mA typical per amplifier |
| Supply Voltage Range | — | [DATA_NEEDED: minimum and maximum supply voltage] |
| Common-Mode Input Voltage Range | — | Includes ground |
| Open-Loop Voltage Gain | — | [DATA_NEEDED: open-loop voltage gain] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance statement] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance statement] |