LM324NSRE4 vs LM324D तुलना

विस्तृत दोनों ओर की तुलना LM324NSRE4 द्वारा Texas Instruments और LM324D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
LM324NSRE4 LM324NSRE4 - Quad 1.2 MHz Op Amp | Texas Instruments | 14-SO

LM324NSRE4 - Quad 1.2 MHz Op Amp | Texas Instruments | 14-SO

LM324NSRE4 ✓ सक्रिय
Texas Instruments
LM324D LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)

LM324D ✓ सक्रिय

विशेषता तुलना

पैरामीटर LM324NSRE4 LM324D
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Number of Amplifiers 4 circuits 4
Amplifier Type Single-supply general-purpose operational amplifier Quad general-purpose operational amplifier
पैकेज 14-pin SOIC (14-SO) 14-pin SOIC
Supply Range 3 V to 36 V for B and BA versions —
Single-Supply Operation Supported —
Split-Supply Operation Supported —
Gain-Bandwidth Product 1.2 MHz —
Slew Rate 0.5 V/us [DATA_NEEDED: slew rate]
Supply-Current Drain 0.8 mA typical —
Common-Mode Input Range Includes ground [DATA_NEEDED: common-mode input range]
Architecture 4 independent frequency-compensated amplifiers Four independent high-gain frequency-compensated operational amplifiers
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Input Offset Voltage 3 mV maximum for B-version family; exact LM324NSRE4 limit requires datasheet confirmation Plus or minus 2 mV maximum for BA versions at 25 C
माउंटिंग प्रकार Surface mount Surface mount
Shipping Form Tape and reel —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Supply Voltage Range — 3 V to 36 V for B versions
ESD Protection — 2 kV HBM for B, BA, and K versions
Input Filtering — Internal RF and EMI filter for B and BA versions
Supply Configuration — Single supply or split supply
Frequency Compensation — Internal
Device Type — Low-power operational amplifier
Input Type — Differential input
आउटपुट प्रकार — Single-ended output
Operating Class — Standard general purpose
AEC-Q100 Status — [DATA_NEEDED: AEC-Q100 qualification status]
Gain Bandwidth Product — [DATA_NEEDED: gain bandwidth product]
Input Bias Current — [DATA_NEEDED: input bias current]
Output Current — [DATA_NEEDED: output current]
Output Swing — [DATA_NEEDED: output swing]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध