LM393N vs LM393M तुलना
विस्तृत दोनों ओर की तुलना LM393N द्वारा Texas Instruments और LM393M द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM393N | LM393M |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Comparator Type | Dual General-Purpose Comparator | — |
| Number of Comparators | 2 (dual) | — |
| आउटपुट प्रकार | Open-Collector / Open-Drain (single-ended) | Open-Collector |
| Input Offset Voltage (max) | 5 mV (LM393N); 2 mV (LM193/LM393A grade) | — |
| Input Bias Current (typ) | 25 nA | — |
| Supply Voltage Range (single supply) | 2 V to 36 V | — |
| Supply Voltage Range (dual supply) | ±1 V to ±18 V | — |
| Output Sink Current (max) | 16 mA | — |
| Propagation Delay (typ) | 1.3 us (300 mV overdrive) | — |
| Common-Mode Input Range | 0 V to VCC - 1.5 V (ground sensing) | — |
| Quiescent Current (typ) | 0.4 mA per comparator (0.8 mA total) | — |
| ऑपरेटिंग तापमान रेंज | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) | — |
| पैकेज | 8-PDIP (DIP-8, through-hole) | 8-SOIC |
| माउंटिंग प्रकार | Through-Hole | Surface mount |
| RoHS स्थिति | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual differential comparator |
| Number of Comparator Channels | — | 2 |
| Comparator Class | — | Standard general purpose |
| Supply Voltage Range | — | 2 V to 36 V |
| Response Time | — | 1.4 microseconds |
| पिन की संख्या | — | 8 pins |
| Supply Configuration | — | Single or dual supply |
| Input Configuration | — | Differential input |
| Output Pull-Up | — | External pull-up resistor required |
| Output Current | — | 18 mA at 5 V |
| Case Style | — | SOIC-8 |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |