LT1012IN8 vs LT1012IJ8 तुलना
विस्तृत दोनों ओर की तुलना LT1012IN8 द्वारा Analog Devices और LT1012IJ8 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LT1012IN8 | LT1012IJ8 |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Unknown | Obsolete |
| Product Type | Single, internally compensated precision operational amplifier | Precision operational amplifier |
| Input Bias Current | Picoampere class | 25 pA |
| Input Offset Voltage | Microvolt class | 8 uV |
| Offset Drift | Low drift with time and temperature | — |
| Voltage Noise | Low noise | — |
| Current Noise | Low noise | — |
| Output Load Current | 5 mA | 5 mA |
| Battery Power Dissipation | 1 mW on two Ni-Cad batteries | — |
| Open-Loop Voltage Gain | 1,000,000 V/V | — |
| ऑपरेटिंग तापमान रेंज | -55 °C to 125 °C | -40°C to +85°C |
| Common-Mode Rejection | Extremely high; numeric ratio not stated | — |
| Power-Supply Rejection | Extremely high; numeric ratio not stated | — |
| Compensation | Internal | Internally compensated |
| Circuit Count | 1 amplifier | — |
| पैकेज | 8-pin PDIP | 8-CERDIP, 0.300 inch, 7.62 mm |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Circuits | — | 1 circuit |
| Power Dissipation | — | 1 mW |
| Voltage Gain | — | 1,000,000 V/V |
| Supply Configuration | — | Two Ni-Cad batteries |
| LT1012 Family Bias-Current Temperature Range | — | -55°C to +125°C |
| Number of Terminals | — | 8 terminals |
| Packaging | — | Tube |
| Minimum Order Quantity | — | 250 pieces |
| Temperature Grade | — | Industrial |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: Common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: Power-supply rejection ratio] |
| Input Voltage Noise | — | [DATA_NEEDED: Input voltage noise density] |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |