LTC2309IF vs LTC2312HTS8-14 तुलना

विस्तृत दोनों ओर की तुलना LTC2309IF द्वारा Analog Devices और LTC2312HTS8-14 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
LTC2309IF LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF ✓ सक्रिय
Analog Devices
LTC2312HTS8-14 LTC2312HTS8-14 - 14-Bit 500ksps Serial SAR ADC | Analog Devices

LTC2312HTS8-14 - 14-Bit 500ksps Serial SAR ADC | Analog Devices

LTC2312HTS8-14 ✓ सक्रिय

विशेषता तुलना

पैरामीटर LTC2309IF LTC2312HTS8-14
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 12 bit 14 bits
Number of Input Channels 8 single-ended / 4 differential 1
Architecture SAR (Successive Approximation Register) —
Conversion Time 1.3 us per channel (typical) —
Throughput Rate up to 500 ksps (datasheet-dependent) —
Supply Voltage (VDD) 5 V single supply —
सप्लाई करंट 300 uA at 1 ksps (typical) 3.2 mA typical
Digital Interface I2C-compatible, standard / fast / high-speed modes —
I2C Address Selection 2 pins (AD0, AD1) - up to 4 devices on one bus —
Internal Reference 2.5 V, 10 ppm/C typical drift —
External Reference Input (REFIN) Yes, supports ratiometric operation —
Sample-and-Hold Fully differential, common-mode noise rejection —
Analog Input Range 0 V to VDD (unipolar); +/-VREF differential 0 V to VREF (unipolar), 2 × VREF (pseudo-bipolar)
पैकेज 20-TSSOP (FE) TSOT-23-8 (8-pin Thin Small Outline Transistor)
Operating Temperature Range (I grade) -40 C to +85 C —
शटडाउन करंट Nap / I2C power-down supported —
RoHS स्थिति Compliant (PBF suffix) Compliant (#TRMPBF suffix)
सैंपलिंग रेट — 500 ksps
ADC Architecture — SAR (Successive Approximation Register)
सप्लाई वोल्टेज — 3 V or 5 V (single supply)
Integrated Reference — Yes, low-drift 20 ppm/°C max
Integral Non-Linearity (INL) — ±1 LSB (typ)
Data Interface — SPI / serial (SCK, SDO, CNV)
ऑपरेटिंग तापमान रेंज — -40 °C to +125 °C (H-grade / automotive)
माउंटिंग प्रकार — Surface Mount
MSL स्तर — 1
AEC-Q100 Automotive Qualification — Qualified (H-grade suffix)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध