LTC2309IF vs MAX1069AEUD+T तुलना

विस्तृत दोनों ओर की तुलना LTC2309IF द्वारा Analog Devices और MAX1069AEUD+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
LTC2309IF LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF ✓ सक्रिय
Analog Devices
MAX1069AEUD+T MAX1069AEUD+T - 14-Bit 58.6ksps I2C SAR ADC | Analog Devices

MAX1069AEUD+T - 14-Bit 58.6ksps I2C SAR ADC | Analog Devices

MAX1069AEUD+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर LTC2309IF MAX1069AEUD+T
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 12 bit 14 bits
Number of Input Channels 8 single-ended / 4 differential 1 single-ended
Architecture SAR (Successive Approximation Register) SAR (Successive Approximation)
Conversion Time 1.3 us per channel (typical) —
Throughput Rate up to 500 ksps (datasheet-dependent) —
Supply Voltage (VDD) 5 V single supply —
सप्लाई करंट 300 uA at 1 ksps (typical) —
Digital Interface I2C-compatible, standard / fast / high-speed modes —
I2C Address Selection 2 pins (AD0, AD1) - up to 4 devices on one bus —
Internal Reference 2.5 V, 10 ppm/C typical drift —
External Reference Input (REFIN) Yes, supports ratiometric operation —
Sample-and-Hold Fully differential, common-mode noise rejection —
Analog Input Range 0 V to VDD (unipolar); +/-VREF differential —
पैकेज 20-TSSOP (FE) 14-pin TSSOP
Operating Temperature Range (I grade) -40 C to +85 C —
शटडाउन करंट Nap / I2C power-down supported —
RoHS स्थिति Compliant (PBF suffix) Compliant
सैंपलिंग रेट — 58.6 ksps
Input Type — Single-ended analog input
Analog Supply Voltage — +2.7 V to +5.25 V
Digital Supply Voltage — [DATA_NEEDED: digital supply range]
Internal Reference Voltage — +4.096 V
External Reference Support — [DATA_NEEDED: external REF input range]
Serial Interface — I2C-compatible 2-wire (Fast-mode and High-speed mode)
I2C Address Pins — ADD0-ADD3 (up to 16 devices on one bus)
On-Chip Clock — 4 MHz internal
Power-Down Mode — Automatic between conversions
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: temperature grade]
माउंटिंग प्रकार — Surface Mount
Lead-Free — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध