LTC2312HTS8-14 vs LTC2309IF तुलना

विस्तृत दोनों ओर की तुलना LTC2312HTS8-14 द्वारा Analog Devices और LTC2309IF द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
LTC2312HTS8-14 LTC2312HTS8-14 - 14-Bit 500ksps Serial SAR ADC | Analog Devices

LTC2312HTS8-14 - 14-Bit 500ksps Serial SAR ADC | Analog Devices

LTC2312HTS8-14 ✓ सक्रिय
Analog Devices
LTC2309IF LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF ✓ सक्रिय

विशेषता तुलना

पैरामीटर LTC2312HTS8-14 LTC2309IF
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 14 bits 12 bit
सैंपलिंग रेट 500 ksps —
ADC Architecture SAR (Successive Approximation Register) —
Number of Input Channels 1 8 single-ended / 4 differential
सप्लाई वोल्टेज 3 V or 5 V (single supply) —
सप्लाई करंट 3.2 mA typical 300 uA at 1 ksps (typical)
Integrated Reference Yes, low-drift 20 ppm/°C max —
Integral Non-Linearity (INL) ±1 LSB (typ) —
Data Interface SPI / serial (SCK, SDO, CNV) —
Analog Input Range 0 V to VREF (unipolar), 2 × VREF (pseudo-bipolar) 0 V to VDD (unipolar); +/-VREF differential
ऑपरेटिंग तापमान रेंज -40 °C to +125 °C (H-grade / automotive) —
पैकेज TSOT-23-8 (8-pin Thin Small Outline Transistor) 20-TSSOP (FE)
माउंटिंग प्रकार Surface Mount —
MSL स्तर 1 —
RoHS स्थिति Compliant (#TRMPBF suffix) Compliant (PBF suffix)
AEC-Q100 Automotive Qualification Qualified (H-grade suffix) —
Architecture — SAR (Successive Approximation Register)
Conversion Time — 1.3 us per channel (typical)
Throughput Rate — up to 500 ksps (datasheet-dependent)
Supply Voltage (VDD) — 5 V single supply
Digital Interface — I2C-compatible, standard / fast / high-speed modes
I2C Address Selection — 2 pins (AD0, AD1) - up to 4 devices on one bus
Internal Reference — 2.5 V, 10 ppm/C typical drift
External Reference Input (REFIN) — Yes, supports ratiometric operation
Sample-and-Hold — Fully differential, common-mode noise rejection
Operating Temperature Range (I grade) — -40 C to +85 C
शटडाउन करंट — Nap / I2C power-down supported

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध