MAX1237KEUA+T vs MAX1237EUA+TGA8 तुलना
विस्तृत दोनों ओर की तुलना MAX1237KEUA+T द्वारा Analog Devices और MAX1237EUA+TGA8 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX1237EUA+TGA8 - 12-Bit 4-Ch 2-Wire Serial ADC | Analog Devices
MAX1237EUA+TGA8 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1237KEUA+T | MAX1237EUA+TGA8 |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bits | 12 bit |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation Register) |
| Number of Input Channels | 2 or 4 single-ended / 1 or 2 differential (software-configurable) | 4 single-ended (single-ended) |
| सैंपलिंग रेट | 94.4 ksps max | 94.4 ksps (max) |
| Input Type | Single-ended / pseudo-differential | Single-ended |
| Analog Supply Voltage (AVDD) | 4.5 V to 5.5 V (MAX1236/MAX1237) | — |
| Digital Supply Voltage (DVDD) | 2.7 V to 3.6 V | — |
| Digital Logic Compatibility | 2.7 V / 3.3 V | — |
| रेफ़रेंस वोल्टेज | 2.048 V internal (4.096 V with external REF applied to MAX1238/MAX1239) | — |
| Integral Nonlinearity (INL) | ±1 LSB (typical) | — |
| Differential Nonlinearity (DNL) | ±1 LSB (typical) | — |
| Serial Interface | I2C-compatible 2-wire (Standard 100 kHz, Fast 400 kHz, High-Speed 3.4 MHz) | I2C-compatible 2-wire (400 kHz Fast Mode, 1.7 MHz High-Speed Mode) |
| पैकेज | 8-pin uMAX / uSOP (3.00 mm) | 8-pin uMAX (uSOP) |
| ऑपरेटिंग तापमान रेंज | -40C to +85C (industrial, K suffix) | -40 C to +85 C |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL level] | — |
| RoHS स्थिति | Compliant | ROHS3 Compliant |
| Channel/Sample Architecture | 1 SAR, 2/4 input mux | — |
| Supply Voltage Range | — | 2.7 V to 3.6 V or 4.5 V to 5.5 V |
| Supply Current (active) | — | 670 uA at max sampling rate |
| Supply Current (low-power) | — | below 230 uA |
| Internal Reference Voltage | — | 2.048 V (MAX1237) |
| External Reference Range | — | 1 V to VDD |
| Analog Input Range (FS) | — | 0 to VREF or 0 to VDD (when ext. REF applied) |
| Conversion Latency | — | SAR synchronous, no pipeline delay |