MAX1281BCUP vs MAX1081BCUP तुलना
विस्तृत दोनों ओर की तुलना MAX1281BCUP द्वारा Analog Devices और MAX1081BCUP द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated
MAX1081BCUP ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1281BCUP | MAX1081BCUP |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| रेज़ोल्यूशन | 12 bit | 10 bit |
| Number of Channels | 4 / 8 input | — |
| सैंपलिंग रेट | 300 ksps (MAX1281) | 400 ksps (external clock, MAX1081) / 300 ksps (internal clock) |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation Register) |
| Data Interface | Serial SPI/QSPI/MICROWIRE-compatible | — |
| Supply Voltage - Analog | 2.7 V to 3.6 V | — |
| सप्लाई करंट | 2.5 mA (typical) | — |
| Internal Reference Voltage | 2.5 V | +2.5 V |
| External Reference Support | [DATA_NEEDED: external reference range] | — |
| Track/Hold Acquisition Time | [DATA_NEEDED: acquisition time ns] | — |
| SINAD | [DATA_NEEDED: SINAD dB] | — |
| ऑपरेटिंग तापमान रेंज | 0C to +70C | 0C to +70C (commercial, 'C' suffix) |
| पैकेज | 20-TSSOP | 20-pin TSSOP |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 1 (unlimited) | — |
| RoHS स्थिति | Compliant | Compliant (MAX1081BCUP+) |
| Process Technology | BiCMOS | — |
| Number of Input Channels | — | 8 (single-ended) / 4 (differential, software-configurable) |
| सप्लाई वोल्टेज | — | +2.7 V to +3.6 V (single supply, MAX1081) |
| Supply Current (Normal Operation) | — | 2.5 mA typical |
| Supply Current (Full Power-Down) | — | <= 10 uA (FULLPD mode) |
| Analog Input Range | — | 0 V to VREF (unipolar) or +/- VREF (bipolar) |
| इंटरफ़ेस | — | SPI / QSPI / MICROWIRE-compatible serial |
| Shutdown Pin | — | Active-low SHDN |
| Power Modes | — | Normal, REDP, FASTPD, FULLPD (AutoShutdown at end of conversion) |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL] |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL] |
| Signal-to-Noise + Distortion (SINAD) | — | [DATA_NEEDED: SINAD] |