MAX1293AEEG+T vs MAX1093BEEG तुलना
विस्तृत दोनों ओर की तुलना MAX1293AEEG+T द्वारा Maxim Integrated और MAX1093BEEG द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Maxim Integrated
MAX1293AEEG+T - 12-Bit 250ksps 4Ch ADC +2.5V Ref | Maxim Integrated
MAX1293AEEG+T ✓ सक्रियAnalog Devices
MAX1093BEEG - 250ksps 10-Bit 4-Ch ADC +2.5V Ref | Maxim Integrated
MAX1093BEEG ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1293AEEG+T | MAX1093BEEG |
|---|---|---|
| ब्रांड | Maxim Integrated | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bits | 10 bit |
| Number of Channels | 4 (single-ended) | — |
| Sample Rate | 250 ksps | — |
| Analog Supply Voltage (AVDD) | +2.7 V to +3.6 V | — |
| Digital I/O Supply (DVDD) | +1.8 V to AVDD | — |
| Internal Reference Voltage | +2.5 V | — |
| Input Range (Unipolar) | 0 to +VREF | — |
| Input Range (Bipolar) | ±VREF/2 | — |
| Supply Current at 250 ksps | 1.9 mA (typ) | — |
| Power-Down Current | [DATA_NEEDED: power-down current typ] | — |
| Wake-Up Time | 2 µs | 2 µs |
| Integral Nonlinearity (INL) | [DATA_NEEDED: INL in LSB] | — |
| Differential Nonlinearity (DNL) | [DATA_NEEDED: DNL in LSB] | — |
| Signal-to-Noise + Distortion (SINAD) | [DATA_NEEDED: SINAD dB] | — |
| On-Chip Oscillator | 16 MHz internal | — |
| इंटरफ़ेस | Byte-wide parallel (8-bit) | — |
| पैकेज | 24-pin QSOP | 24-pin QSOP |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C (industrial) | -40 °C to +85 °C (industrial) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Terminal Form | Gull Wing | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | 1 | — |
| सैंपलिंग रेट | — | 250 ksps |
| Number of Input Channels | — | 4 single-ended / 2 pseudo-differential |
| Architecture | — | SAR (Successive Approximation) |
| इनपुट वोल्टेज रेंज | — | 0 V to VREF (single-ended); ±VREF (pseudo-differential) |
| सप्लाई वोल्टेज | — | +2.7 V to +3.6 V |
| Supply Current (250 ksps) | — | 1.9 mA (typ) |
| Supply Current (Auto Power-Down) | — | 1 µA (typ) |
| Internal Reference | — | +2.5 V |
| INL (max) | — | ±1 LSB |
| DNL (max) | — | ±1 LSB |
| Digital Interface | — | Byte-wide parallel |