MAX1480ACPI+ vs MAX1480CCPI+ तुलना
विस्तृत दोनों ओर की तुलना MAX1480ACPI+ द्वारा Maxim Integrated और MAX1480CCPI+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Maxim Integrated
MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated
MAX1480CCPI+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1480ACPI+ | MAX1480CCPI+ |
|---|---|---|
| ब्रांड | Maxim Integrated | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Complete electrically isolated RS-485/RS-422 data transceiver | Isolated RS-485/RS-422 transceiver |
| Transceiver Configuration | 1/1 half-duplex transceiver | — |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Isolation | Electrically isolated | Galvanically isolated logic-side and bus-side interfaces |
| Logic-Side Supply Voltage | 5 V | — |
| Maximum Data Rate | 250 kb/s | 250 kbps |
| पैकेज | 28-pin DIP | 28-pin DIP, 0.600 in (15.24 mm) width |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Device Family | MAX1480A/B/C | — |
| Construction | Hybrid microcircuit | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Isolation Voltage Rating | [DATA_NEEDED: isolation voltage rating] | — |
| Bus Driver Output Current | [DATA_NEEDED: bus driver output current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Isolation Technology | [DATA_NEEDED: isolation technology] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half duplex |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Driver Slew Rate | — | Reduced slew rate |
| Logic-Side Supply | — | Single 5 V supply powers both sides of the interface |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Isolation Voltage | — | [DATA_NEEDED: isolation withstand voltage] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| AEC-Q100 Qualification | — | not_applicable |