MAX1480AEPI+ vs MAX1480ECCPI+ तुलना

विस्तृत दोनों ओर की तुलना MAX1480AEPI+ द्वारा Analog Devices और MAX1480ECCPI+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX1480AEPI+ MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480AEPI+ ✓ सक्रिय
Analog Devices
MAX1480ECCPI+ MAX1480ECCPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480ECCPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480ECCPI+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX1480AEPI+ MAX1480ECCPI+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Isolated RS-485/RS-422 transceiver Isolated RS-485/RS-422 transceiver
Transmitter and Receiver Count 1 transmitter and 1 receiver —
Duplex Mode Half-duplex —
डेटा दर 250 kbps [DATA_NEEDED: maximum data rate]
Supported Interfaces RS-485 and RS-422 —
सप्लाई वोल्टेज +5 V on the logic side —
Isolation Architecture Electrically isolated —
पैकेज 28-pin PDIP, 0.600 inch, 15.24 mm PDIP-28, 28 pins
माउंटिंग स्टाइल Through-hole —
Logic-Side Supply Architecture Single +5 V supply powers both sides of the interface —
Application Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces —
Manufacturer Family MAX1480A/B/C —
Available Package Configuration 28-pin DIP —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Isolation Voltage Rating [DATA_NEEDED: isolation voltage rating] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Transceiver Configuration — 1/1 half-duplex transceiver
Supported Standards — RS-485 and RS-422
Supply Voltage Range — 4.5 V to 5.5 V
ESD Protection — ±15 kV
Isolation Type — Galvanically isolated data interface
माउंटिंग प्रकार — Through-hole
Transmitter Terminations — 5 terminations
Interface Functions — 1 driver and 1 receiver function
Product Designation — MAX1480E
New-Design Recommendation — MAX1480E family recommended for new designs
Isolation withstand Voltage — [DATA_NEEDED: isolation withstand voltage]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध