MAX1480BCPI+ vs MAX1480ACPI+ तुलना
विस्तृत दोनों ओर की तुलना MAX1480BCPI+ द्वारा Analog Devices और MAX1480ACPI+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1480BCPI+ | MAX1480ACPI+ |
|---|---|---|
| ब्रांड | Analog Devices | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| डेटा दर | 250 kbps | — |
| Receiver Hysteresis | 70 mV | — |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| पैकेज | 28-PDIP (0.600", 15.24 mm wide) | 28-pin DIP |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | — |
| माउंटिंग प्रकार | Through-Hole | Through-hole |
| ऑपरेटिंग तापमान | -40C to +85C | — |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | Hybrid microcircuit |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Complete electrically isolated RS-485/RS-422 data transceiver |
| Transceiver Configuration | — | 1/1 half-duplex transceiver |
| Supported Standards | — | RS-485 and RS-422 |
| Isolation | — | Electrically isolated |
| Logic-Side Supply Voltage | — | 5 V |
| Maximum Data Rate | — | 250 kb/s |
| Device Family | — | MAX1480A/B/C |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| Isolation Voltage Rating | — | [DATA_NEEDED: isolation voltage rating] |
| Bus Driver Output Current | — | [DATA_NEEDED: bus driver output current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Isolation Technology | — | [DATA_NEEDED: isolation technology] |
| REACH Status | — | [DATA_NEEDED: REACH status] |