MAX1480CCPI+ vs MAX1480ACPI+ तुलना
विस्तृत दोनों ओर की तुलना MAX1480CCPI+ द्वारा Maxim Integrated और MAX1480ACPI+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Maxim Integrated
MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated
MAX1480CCPI+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1480CCPI+ | MAX1480ACPI+ |
|---|---|---|
| ब्रांड | Maxim Integrated | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Isolated RS-485/RS-422 transceiver | Complete electrically isolated RS-485/RS-422 data transceiver |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | 250 kb/s |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | Electrically isolated |
| Driver Slew Rate | Reduced slew rate | — |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| पैकेज | 28-pin DIP, 0.600 in (15.24 mm) width | 28-pin DIP |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| क्वाइसेंट करंट | [DATA_NEEDED: quiescent current] | — |
| RoHS स्थिति | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Transceiver Configuration | — | 1/1 half-duplex transceiver |
| Logic-Side Supply Voltage | — | 5 V |
| Device Family | — | MAX1480A/B/C |
| Construction | — | Hybrid microcircuit |
| Isolation Voltage Rating | — | [DATA_NEEDED: isolation voltage rating] |
| Bus Driver Output Current | — | [DATA_NEEDED: bus driver output current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Isolation Technology | — | [DATA_NEEDED: isolation technology] |