MAX1480CEPI+ vs MAX1480CCPI+ तुलना
विस्तृत दोनों ओर की तुलना MAX1480CEPI+ द्वारा Analog Devices और MAX1480CCPI+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX1480CEPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480CEPI+ ✓ सक्रियMaxim Integrated
MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated
MAX1480CCPI+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX1480CEPI+ | MAX1480CCPI+ |
|---|---|---|
| ब्रांड | Analog Devices | Maxim Integrated |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 1/1 Transceiver Half (isolated RS-485/RS-422 interface) | Isolated RS-485/RS-422 transceiver |
| Supported Standards | RS-485, RS-422 | RS-485 and RS-422 |
| Isolation | Electrically isolated (hybrid microcircuit with isolation barrier) | Galvanically isolated logic-side and bus-side interfaces |
| Supply Architecture | Single +5 V supply on the logic side powers both sides of the interface | — |
| पैकेज | 28-PDIP (28-pin plastic DIP, through-hole) | 28-pin DIP, 0.600 in (15.24 mm) width |
| पिन की संख्या | 28 | — |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| Package Code / Shape | DIP, rectangular | — |
| Temperature Grade | Industrial | — |
| Driver Configuration | Half-duplex, 1 driver / 1 receiver | — |
| Driver Slew Rate | Reduced-slew-rate drivers (MAX1480B/C feature) to minimize EMI | Reduced slew rate |
| Family Variants | MAX1480A / MAX1480B / MAX1480C share the 28-pin DIP package | — |
| Maximum Data Rate | [DATA_NEEDED: maximum signaling rate for MAX1480C variant] | 250 kbps |
| Common-Mode Range | [DATA_NEEDED: bus-side common-mode voltage range] | — |
| Isolation Withstand Voltage | [DATA_NEEDED: isolation withstand voltage rating] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: minimum and maximum junction/ambient operating temperature] | [DATA_NEEDED: operating temperature range] |
| Logic Supply Voltage Range | [DATA_NEEDED: VCC operating range] | — |
| RoHS स्थिति | unknown | unknown |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half duplex |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Logic-Side Supply | — | Single 5 V supply powers both sides of the interface |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Isolation Voltage | — | [DATA_NEEDED: isolation withstand voltage] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |