MAX15300ETI+T vs MAX15300ETI+ तुलना

विस्तृत दोनों ओर की तुलना MAX15300ETI+T द्वारा Maxim Integrated और MAX15300ETI+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Maxim Integrated
MAX15300ETI+T MAX15300ETI+T - Auto-Comp Digital PoL Controller | Maxim Integrated

MAX15300ETI+T - Auto-Comp Digital PoL Controller | Maxim Integrated

MAX15300ETI+T ✓ सक्रिय
Maxim Integrated
MAX15300ETI+ MAX15300ETI+ - Auto-Comp Digital PoL Controller, QFN-28 | Maxim Integrated

MAX15300ETI+ - Auto-Comp Digital PoL Controller, QFN-28 | Maxim Integrated

MAX15300ETI+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX15300ETI+T MAX15300ETI+
ब्रांड Maxim Integrated Maxim Integrated
श्रेणी DC-DC Converters DC-DC Converters
लाइफसाइकिल स्थिति सक्रिय सक्रिय
टोपोलॉजी Synchronous Buck Controller (PoL) Non-isolated synchronous buck (step-down), external MOSFETs
इनपुट वोल्टेज रेंज 4.7 V to 24 V [DATA_NEEDED: VIN min/max]
आउटपुट वोल्टेज रेंज 0.6 V to 5.25 V Programmable via PMBus (down to sub-1V, see datasheet for exact range)
आउटपुट की संख्या 1 1
Maximum Output Current (external MOSFET dependent) 30 A+ typical design point —
स्विचिंग फ्रीक्वेंसी 600 / 800 / 1000 / 1200 kHz (programmable) Programmable; typical range [DATA_NEEDED: fSW min/max]
Control Method Digital PID with Auto-Compensation Peak current mode with Adaptive Auto-Comp digital loop
Digital Interface PMBus 1.2/1.3-compatible SMBus PMBus / SMBus compatible
Output Voltage Resolution [DATA_NEEDED: VDAC resolution] —
Internal ADC 8-bit (VOUT, IOUT, temperature telemetry) —
Current Sense Method Rsense or inductor DCR sensing —
सॉफ्ट-स्टार्ट Programmable via PMBus —
Pre-Bias Startup Monotonic (yes) —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: junction/ambient range] —
पैकेज 28-pin TQFN-EP (5x5 mm) 28-pin QFN (TQFN-28), exposed pad
माउंटिंग प्रकार Surface Mount Surface Mount
Lead-Free / RoHS Lead-free, RoHS3 compliant per distributor listings —
फ़ंक्शन — Digital Point-of-Load (PoL) DC-DC Controller
Output Current Capability — Set by external MOSFETs / inductor; controller is not load-limited internally
ऑपरेटिंग तापमान — -40C to +85C (extended industrial)
MSL स्तर — [DATA_NEEDED: MSL rating]
RoHS स्थिति — Compliant (lead-free +RoHS suffix)
Fault Protection — OVP, UVP, OCP, OTP (configurable via PMBus)
विशेषताएँ — Adaptive Auto-Comp, PMBus telemetry, sequencing, margining, power-good

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध