MAX15300ETI+ vs MAX15300ETI+T तुलना

विस्तृत दोनों ओर की तुलना MAX15300ETI+ द्वारा Maxim Integrated और MAX15300ETI+T द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Maxim Integrated
MAX15300ETI+ MAX15300ETI+ - Auto-Comp Digital PoL Controller, QFN-28 | Maxim Integrated

MAX15300ETI+ - Auto-Comp Digital PoL Controller, QFN-28 | Maxim Integrated

MAX15300ETI+ ✓ सक्रिय
Maxim Integrated
MAX15300ETI+T MAX15300ETI+T - Auto-Comp Digital PoL Controller | Maxim Integrated

MAX15300ETI+T - Auto-Comp Digital PoL Controller | Maxim Integrated

MAX15300ETI+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX15300ETI+ MAX15300ETI+T
ब्रांड Maxim Integrated Maxim Integrated
श्रेणी DC-DC Converters DC-DC Converters
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Digital Point-of-Load (PoL) DC-DC Controller —
टोपोलॉजी Non-isolated synchronous buck (step-down), external MOSFETs Synchronous Buck Controller (PoL)
Control Method Peak current mode with Adaptive Auto-Comp digital loop Digital PID with Auto-Compensation
Digital Interface PMBus / SMBus compatible PMBus 1.2/1.3-compatible SMBus
इनपुट वोल्टेज रेंज [DATA_NEEDED: VIN min/max] 4.7 V to 24 V
आउटपुट वोल्टेज रेंज Programmable via PMBus (down to sub-1V, see datasheet for exact range) 0.6 V to 5.25 V
स्विचिंग फ्रीक्वेंसी Programmable; typical range [DATA_NEEDED: fSW min/max] 600 / 800 / 1000 / 1200 kHz (programmable)
आउटपुट की संख्या 1 1
Output Current Capability Set by external MOSFETs / inductor; controller is not load-limited internally —
ऑपरेटिंग तापमान -40C to +85C (extended industrial) —
पैकेज 28-pin QFN (TQFN-28), exposed pad 28-pin TQFN-EP (5x5 mm)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL rating] —
RoHS स्थिति Compliant (lead-free +RoHS suffix) —
Fault Protection OVP, UVP, OCP, OTP (configurable via PMBus) —
विशेषताएँ Adaptive Auto-Comp, PMBus telemetry, sequencing, margining, power-good —
Maximum Output Current (external MOSFET dependent) — 30 A+ typical design point
Output Voltage Resolution — [DATA_NEEDED: VDAC resolution]
Internal ADC — 8-bit (VOUT, IOUT, temperature telemetry)
Current Sense Method — Rsense or inductor DCR sensing
सॉफ्ट-स्टार्ट — Programmable via PMBus
Pre-Bias Startup — Monotonic (yes)
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: junction/ambient range]
Lead-Free / RoHS — Lead-free, RoHS3 compliant per distributor listings

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध