MAX202CSE+ vs MAX202IDR तुलना
विस्तृत दोनों ओर की तुलना MAX202CSE+ द्वारा Maxim Integrated और MAX202IDR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX202CSE+ | MAX202IDR |
|---|---|---|
| ब्रांड | Maxim Integrated | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Dual RS-232 transceiver interface IC | 5 V dual RS-232 line driver/receiver |
| सप्लाई वोल्टेज | +5 V | 5 V nominal |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Maximum Data Rate | In excess of 120 kbps | 120 kbps |
| Driver Output Signal Level | ±5 V EIA/TIA-232E | — |
| External Charge-Pump Capacitors | 0.1 µF | Four 0.1 µF capacitors |
| Interface Standard | EIA/TIA-232E | TIA/EIA-232-F |
| Communication Protocol | RS-232 / V.28 | — |
| पैकेज | 16-pin SOIC | 16-pin SOIC |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| Input Logic Levels | [DATA_NEEDED: input logic thresholds] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Channel Configuration | — | 2 line drivers and 2 line receivers |
| Driver Output Levels | — | ±9 V |
| ESD Protection | — | ±15 kV human-body-model protection |
| Transceiver Type | — | Full-duplex 2/2 RS-232 transceiver |
| Logic Compatibility | — | TTL/CMOS logic-level interface |
| ESD Coverage | — | Serial-port connection pins, including ground |
| Quoted Output Signal Levels | — | ±5 V EIA/TIA-232E under specified loading |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |