MAX211CDBR vs MAX211EEAI+ तुलना

विस्तृत दोनों ओर की तुलना MAX211CDBR द्वारा Texas Instruments और MAX211EEAI+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
MAX211CDBR MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX211CDBR ✓ सक्रिय
Analog Devices
MAX211EEAI+ MAX211EEAI+ 4/5 RS-232 Transceiver | Analog Devices

MAX211EEAI+ 4/5 RS-232 Transceiver | Analog Devices

MAX211EEAI+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX211CDBR MAX211EEAI+
ब्रांड Texas Instruments Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Multichannel RS-232 line driver/receiver RS-232 and V.28 transceiver
सप्लाई वोल्टेज 5 V 4.5 V to 5.5 V
Driver Count 4 4 drivers
Receiver Count 5 5 receivers
Maximum Data Rate 120 kbit/s Greater than 120 kbps
Driver Output Swing ±9 V —
RS-232 Bus Pin ESD Protection ±15 kV, human-body model —
Standards Support TIA/EIA-232-F and ITU V.28 —
पैकेज 28-pin SSOP, 5.30 mm width 28-pin SSOP
माउंटिंग प्रकार Surface mount Surface mount
Shutdown Feature Three driver outputs can be placed in shutdown —
Power-Supply Topology Single 5 V supply with integrated charge-pump circuitry —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
सप्लाई करंट [DATA_NEEDED: operating supply current] [DATA_NEEDED: supply current]
Shutdown Supply Current Low; exact value [DATA_NEEDED: shutdown supply current] —
Driver Input Logic Levels [DATA_NEEDED: driver input logic thresholds] —
Receiver Output Logic Levels [DATA_NEEDED: receiver output logic levels] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
RS-232 Output Signal Level — ±5 V
Standard Compatibility — EIA/TIA-232E and CCITT V.28
ESD Protection — ±15 kV HBM
Charge Pump — Integrated, single +5 V operation
Logic Output State — TTL tri-state
ऑपरेटिंग तापमान — [DATA_NEEDED: operating temperature range]
Driver Output Current — [DATA_NEEDED: driver output current]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध