MAX211EEAI+ vs MAX211CDBR तुलना

विस्तृत दोनों ओर की तुलना MAX211EEAI+ द्वारा Analog Devices और MAX211CDBR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX211EEAI+ MAX211EEAI+ 4/5 RS-232 Transceiver | Analog Devices

MAX211EEAI+ 4/5 RS-232 Transceiver | Analog Devices

MAX211EEAI+ ✓ सक्रिय
Texas Instruments
MAX211CDBR MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX211CDBR ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX211EEAI+ MAX211CDBR
ब्रांड Analog Devices Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-232 and V.28 transceiver Multichannel RS-232 line driver/receiver
Driver Count 4 drivers 4
Receiver Count 5 receivers 5
सप्लाई वोल्टेज 4.5 V to 5.5 V 5 V
Maximum Data Rate Greater than 120 kbps 120 kbit/s
RS-232 Output Signal Level ±5 V —
Standard Compatibility EIA/TIA-232E and CCITT V.28 —
ESD Protection ±15 kV HBM —
Charge Pump Integrated, single +5 V operation —
Logic Output State TTL tri-state —
पैकेज 28-pin SSOP 28-pin SSOP, 5.30 mm width
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] —
सप्लाई करंट [DATA_NEEDED: supply current] [DATA_NEEDED: operating supply current]
Driver Output Current [DATA_NEEDED: driver output current] —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Driver Output Swing — ±9 V
RS-232 Bus Pin ESD Protection — ±15 kV, human-body model
Standards Support — TIA/EIA-232-F and ITU V.28
Shutdown Feature — Three driver outputs can be placed in shutdown
Power-Supply Topology — Single 5 V supply with integrated charge-pump circuitry
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
Shutdown Supply Current — Low; exact value [DATA_NEEDED: shutdown supply current]
Driver Input Logic Levels — [DATA_NEEDED: driver input logic thresholds]
Receiver Output Logic Levels — [DATA_NEEDED: receiver output logic levels]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध