MAX232BASE+ vs MAX3232ECDR तुलना
विस्तृत दोनों ओर की तुलना MAX232BASE+ द्वारा Analog Devices और MAX3232ECDR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
MAX3232ECDR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3232ECDR ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX232BASE+ | MAX3232ECDR |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Dual RS-232 driver and receiver | Dual RS-232 line driver and receiver |
| Driver Count | 2 drivers | — |
| Receiver Count | 2 receivers | — |
| Number of Transceivers | 2/2 transceiver | — |
| सप्लाई वोल्टेज | +5 V | — |
| Receiver Input Tolerance | ±30 V | — |
| Receiver Logic Threshold | 1.3 V typical | — |
| Receiver Hysteresis | 0.5 V typical | — |
| Output Logic Level | 5 V TTL/CMOS | — |
| Interface Standard | TIA/EIA-232-F | RS-232 |
| पैकेज | 16-pin SOIC, 0.154 in (3.90 mm) width | 16-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Voltage Generator | On-chip capacitive voltage generator | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 250 kbps |
| ESD Protection | — | ±15 kV IEC ESD protection |
| Transceiver Configuration | — | 2 transmit and 2 receive functions |
| Supply Topology | — | Single 3 V to 5.5 V supply |
| ESD Test Method | — | IEC 61000-4-2 contact and air-gap discharge |
| TIA/EIA Compliance | — | Meets or exceeds TIA/EIA-232-F requirements |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Standard Packaging | — | [DATA_NEEDED: tape-and-reel standard quantity] |