MAX232BEASE+T vs MAX232ACSE+T तुलना

विस्तृत दोनों ओर की तुलना MAX232BEASE+T द्वारा Analog Devices और MAX232ACSE+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX232BEASE+T MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices

MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices

MAX232BEASE+T ✓ सक्रिय
Analog Devices
MAX232ACSE+T MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated

MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated

MAX232ACSE+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX232BEASE+T MAX232ACSE+T
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-232 transceiver —
Transmit Channels 2 —
Receive Channels 2 —
Interface Configuration 2/2 full-duplex RS-232 —
सप्लाई वोल्टेज +5 V 4.5 V to 5.5 V
ऑपरेटिंग तापमान रेंज -40°C to +125°C —
पैकेज 16-pin SOIC 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
माउंटिंग प्रकार Surface mount Surface Mount
Manufacturer Analog Devices / Maxim Integrated —
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Transmitter Output Levels [DATA_NEEDED: RS-232 transmitter output levels] —
Receiver Input Levels [DATA_NEEDED: RS-232 receiver input levels] —
सप्लाई करंट [DATA_NEEDED: supply current] —
क्वाइसेंट करंट [DATA_NEEDED: quiescent current] —
Shutdown Supply Current [DATA_NEEDED: shutdown supply current] —
ESD Tolerance [DATA_NEEDED: ESD tolerance] —
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Operating Voltage Range [DATA_NEEDED: operating supply-voltage range] —
Output Capacitance Requirement [DATA_NEEDED: charge-pump capacitor requirement] —
फ़ंक्शन — RS-232 Transceiver (2 Driver / 2 Receiver)
डेटा दर — 200 kbps
Number of Drivers — 2
Number of Receivers — 2
Duplex — Full
Receiver Input Voltage Range — ±30 V (HBM ESD tolerance on RS-232 inputs)
ऑपरेटिंग तापमान — 0 °C to +70 °C (C grade)
Charge Pump Capacitors — 4 x 0.1 µF external (typical)
Shutdown Mode — Yes (active-low, device-dependent)
MSL स्तर — [DATA_NEEDED: MSL level]
Packaging — Tape & Reel (+T suffix)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध