MAX232CSE+ vs SP232ACP-L तुलना

विस्तृत दोनों ओर की तुलना MAX232CSE+ द्वारा Analog Devices और SP232ACP-L द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX232CSE+ MAX232CSE+ - Dual RS-232 Transceiver, 16-SOIC | Analog Devices

MAX232CSE+ - Dual RS-232 Transceiver, 16-SOIC | Analog Devices

MAX232CSE+ ✓ सक्रिय
MaxLinear
SP232ACP-L SP232ACP-L - Dual RS-232 Transceiver, 120 kbps | MaxLinear, Inc.

SP232ACP-L - Dual RS-232 Transceiver, 120 kbps | MaxLinear, Inc.

SP232ACP-L ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX232CSE+ SP232ACP-L
ब्रांड Analog Devices MaxLinear
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Dual RS-232 Transceiver RS-232 line driver and receiver transceiver
Interface Standard EIA/TIA-232E, V.28, V.24 —
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V
Number of Drivers 2 —
Number of Receivers 2 —
Transceiver Configuration 2/2 Full RS-232 —
पैकेज 16-SOIC narrow 16-pin PDIP
पिन काउंट 16 pins —
माउंटिंग प्रकार Surface mount —
Technology CMOS —
Charge Pump On-chip voltage converter —
Supply Polarity Single positive supply —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] 0 °C to 70 °C
Operating Temperature Grade [DATA_NEEDED: commercial or industrial temperature grade] —
Driver Slew Rate [DATA_NEEDED: driver slew rate] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Driver Count — 2 drivers
Receiver Count — 2 receivers
Nominal Supply Voltage — 5 V
Maximum Data Rate — 120 kbps under load
ESD Protection — 2 kV
Charge-Pump Capacitor — 0.1 µF
Protocol Compliance — EIA/TIA-232 and V.28
RS-232 Standards Compatibility — RS-232D
Logic Compatibility — Pin-to-pin compatible with popular industry-standard pinouts
माउंटिंग स्टाइल — Through-hole PDIP
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध