MAX232NSR vs ADM202JRN तुलना

विस्तृत दोनों ओर की तुलना MAX232NSR द्वारा Texas Instruments और ADM202JRN द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
MAX232NSR MAX232NSR - 2/2 RS-232 Transceiver, 120 kbps | Texas Instruments (Tape & Reel)

MAX232NSR - 2/2 RS-232 Transceiver, 120 kbps | Texas Instruments (Tape & Reel)

MAX232NSR ✓ सक्रिय
Analog Devices
ADM202JRN ADM202JRN - Dual RS-232 Transceiver, 5V | Analog Devices

ADM202JRN - Dual RS-232 Transceiver, 5V | Analog Devices

ADM202JRN ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX232NSR ADM202JRN
ब्रांड Texas Instruments Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-232 dual transceiver Dual RS-232 line driver/receiver pair
Number of Drivers 2 2
Number of Receivers 2 2
Maximum Data Rate 120 kbps 120 kB/s
Supply Voltage Range 4.5 V to 5.5 V —
Typical Receiver Threshold 1.3 V —
Receiver Hysteresis 500 mV —
Maximum Receiver Input Voltage ±30 V —
ऑपरेटिंग तापमान 0 °C to 70 °C (TA) [DATA_NEEDED: operating temperature range]
पैकेज 16-pin SOIC, 0.209-inch body width 16-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
Integrated Voltage Generator Yes, capacitive charge-pump voltage generator —
Supported Supply Configuration Single 5 V supply —
Logic Interface TTL/CMOS —
Signal Standard TIA/EIA-232-F —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
सप्लाई वोल्टेज — 5 V
RS-232 Output Levels — Approximately ±10 V
Charge Pump Capacitor — 0.1 µF
Interface Standard — TIA/EIA-232-E and V.28
Transceiver Configuration — 2/2 full-duplex RS-232
Power Architecture — On-chip charge pump
Cable Support — Extended cable lengths with high drive currents

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध