MAX3078EESA+ vs THVD1400DR तुलना

विस्तृत दोनों ओर की तुलना MAX3078EESA+ द्वारा Analog Devices और THVD1400DR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3078EESA+ MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ ✓ सक्रिय
Texas Instruments
THVD1400DR THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments

THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments

THVD1400DR ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3078EESA+ THVD1400DR
ब्रांड Analog Devices Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 transceiver —
Supply Voltage Range 2.97V to 3.63V —
Driver Count 1 —
Receiver Count 1 —
Interface Standards RS-485 and RS-422 —
ESD Protection ±15kV —
Fail-Safe Receiver Logic-high output when receiver inputs are open or shorted —
Hot-Swap Capability Supported —
Unloaded Supply Current 800µA —
Supply Current With Drivers Disabled 800µA when fully loaded —
पैकेज 8-pin SOIC 8-pin SOIC (SOIC-8, D suffix)
माउंटिंग प्रकार Surface mount Surface Mount
DigiKey Listing Package 8-SOIC —
Manufacturer Product Status PRODUCTION —
Manufacturer Data Sheet Revision Rev. 5 —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Common-Mode Rejection [DATA_NEEDED: common-mode rejection ratio] —
Differential Input Threshold [DATA_NEEDED: differential input threshold] —
Driver Output Current [DATA_NEEDED: driver output current] —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
फ़ंक्शन — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Supply Voltage (VCC) — 3.0 V to 5.5 V
डेटा दर — 500 kbps (max)
Receiver Hysteresis — 50 mV (typ)
Bus Common-Mode Voltage — -7 V to +12 V
ESD Protection (Bus Pins, HBM) — ±16 kV
ESD Protection (Bus Pins, IEC 61000-4-2 Contact) — ±12 kV
Unit Load — 1/8 (256 nodes max)
Lead-Free — Yes
Receiver Fail-Safe — Yes (open, short, idle bus)
Hot-Plug Support — Yes
शटडाउन करंट — [DATA_NEEDED: shutdown current value]
Quiescent Current (typ) — [DATA_NEEDED: quiescent current value]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध