MAX3078EESA+ vs MAX3076EESD+T तुलना

विस्तृत दोनों ओर की तुलना MAX3078EESA+ द्वारा Analog Devices और MAX3076EESD+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3078EESA+ MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ ✓ सक्रिय
Analog Devices
MAX3076EESD+T MAX3076EESD+T - 16Mbps RS-485/RS-422 3.3V Transceiver

MAX3076EESD+T - 16Mbps RS-485/RS-422 3.3V Transceiver

MAX3076EESD+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3078EESA+ MAX3076EESD+T
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage Range 2.97V to 3.63V 2.97 V to 3.63 V
Driver Count 1 1
Receiver Count 1 1
Interface Standards RS-485 and RS-422 RS-485 and RS-422
ESD Protection ±15kV ±15 kV
Fail-Safe Receiver Logic-high output when receiver inputs are open or shorted Yes; logic-high output when receiver inputs are open or shorted
Hot-Swap Capability Supported —
Unloaded Supply Current 800µA —
Supply Current With Drivers Disabled 800µA when fully loaded —
पैकेज 8-pin SOIC 14-pin narrow SOIC, 3.90 mm width
माउंटिंग प्रकार Surface mount Surface mount
DigiKey Listing Package 8-SOIC —
Manufacturer Product Status PRODUCTION —
Manufacturer Data Sheet Revision Rev. 5 —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Common-Mode Rejection [DATA_NEEDED: common-mode rejection ratio] [DATA_NEEDED: common-mode rejection]
Differential Input Threshold [DATA_NEEDED: differential input threshold] —
Driver Output Current [DATA_NEEDED: driver output current] —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] unknown
REACH Status [DATA_NEEDED: REACH compliance status] —
Maximum Data Rate — 16 Mbps
Hot-Swap Support — Yes
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Driver Output Protection — [DATA_NEEDED: driver output protection details]
सप्लाई करंट — [DATA_NEEDED: operating supply current]
AEC-Q100 Qualification — not_applicable

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध