MAX3232ESE+TG035 vs MAX232ECSE+ तुलना
विस्तृत दोनों ओर की तुलना MAX3232ESE+TG035 द्वारा Maxim Integrated और MAX232ECSE+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Maxim Integrated
MAX3232ESE+TG035 - 2x2 RS-232 Transceiver, 3-5.5V | Maxim
MAX3232ESE+TG035 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3232ESE+TG035 | MAX232ECSE+ |
|---|---|---|
| ब्रांड | Maxim Integrated | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | RS-232 Transceiver (2 drivers, 2 receivers) | — |
| Supply Voltage Range | 3.0 V to 5.5 V | — |
| डेटा दर | Up to 1 Mbps | 120 kbps |
| External Capacitors | 4 x 0.1 uF | — |
| सप्लाई करंट | [DATA_NEEDED: typical supply current] | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| ऑपरेटिंग तापमान | -40C to +85C (E grade) | Extended temperature option; exact range in ordering information |
| पैकेज | 16-pin SOIC (N) | 16-SOIC (NSOIC) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Packaging Variant | TG035 (tape and reel, 3.5 inch reel) | — |
| Protocol Standard | EIA/TIA-232, V.28 | — |
| Duplex | Full duplex | — |
| Base Part Number | MAX323 | — |
| Series | MAX3232 | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | — |
| Package Width | 0.15 inch (3.9 mm), narrow SOIC | — |
| Product Type | — | RS-232 transceiver |
| Driver and Receiver Configuration | — | 2 drivers / 2 receivers |
| सप्लाई वोल्टेज | — | +5 V |
| Interface Standard | — | RS-232 and V.28 |
| ESD Protection | — | ±15 kV HBM |
| Charge Pump | — | Integrated |
| External Supply Requirement | — | No external ±10 V supply required |
| Logic Level Compatibility | — | TTL/CMOS |
| पिन की संख्या | — | 16 pins |
| Compliance Status | — | RoHS and REACH status; exact declarations require manufacturer confirmation |
| Automotive Qualification | — | Not specified as AEC-Q100 qualified |
| Output Driver Current | — | [DATA_NEEDED: output driver current] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |