MAX338CSE+ vs MAX338CSE+T तुलना
विस्तृत दोनों ओर की तुलना MAX338CSE+ द्वारा Maxim Integrated और MAX338CSE+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX338CSE+ | MAX338CSE+T |
|---|---|---|
| ब्रांड | Maxim Integrated | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | 8:1 analog multiplexer (or dual 4:1) | — |
| Number of Channels | 8 single-ended or 2x4 differential | 8 channels |
| On-State Resistance (RON) | 400 ohm (max 650 ohm over signal) | — |
| Single Supply Voltage | +4.5 V to +30 V | — |
| Dual Supply Voltage | +/-4.5 V to +/-20 V | — |
| Logic Compatibility | TTL/CMOS compatible | — |
| Channel Leakage | Low-leakage CMOS, ~ nA typical | — |
| Switching Action | Break-before-make | — |
| Address Lines | 3-bit binary (A0, A1, A2) | — |
| Enable Input | Active-low EN | — |
| On Time (tON) | [DATA_NEEDED: ON switching time] | — |
| Off Time (tOFF) | [DATA_NEEDED: OFF switching time] | — |
| ऑपरेटिंग तापमान | 0 C to +70 C (commercial) | — |
| पैकेज | 16-pin Narrow SOIC (NSOIC) | 16-pin narrow SOIC |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| RoHS स्थिति | Compliant (Pb-free suffix '+') | [DATA_NEEDED: RoHS status] |
| ESD Protection | Yes (per datasheet) | — |
| Multiplexer Configuration | — | 8:1 |
| Number of Circuits | — | 1 circuit |
| Maximum On-Resistance | — | 400 ohm |
| Single-Supply Operating Range | — | +4.5 V to +30 V |
| Dual-Supply Operating Range | — | ±4.5 V to ±20 V |
| TTL Input Logic High | — | +0.8 V to +2.4 V |
| Process Technology | — | 44 V silicon-gate CMOS process |
| Switch Type | — | CMOS analog multiplexer |
| Signal Direction | — | Bidirectional conduction |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| Channel Leakage Current | — | [DATA_NEEDED: channel leakage current] |
| Charge Injection | — | [DATA_NEEDED: charge injection] |
| Off-Isolation | — | [DATA_NEEDED: off-isolation] |
| Enable Control | — | [DATA_NEEDED: enable control configuration] |
| Standard Reel Quantity | — | [DATA_NEEDED: standard reel quantity] |