MAX338CSE+ vs MAX338EPE+ तुलना

विस्तृत दोनों ओर की तुलना MAX338CSE+ द्वारा Maxim Integrated और MAX338EPE+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Maxim Integrated
MAX338CSE+ MAX338CSE+ - 8-Channel CMOS Analog Multiplexer | Maxim

MAX338CSE+ - 8-Channel CMOS Analog Multiplexer | Maxim

MAX338CSE+ ✓ सक्रिय
Analog Devices
MAX338EPE+ MAX338EPE+ - 8:1 400Ω Analog Multiplexer | Analog Devices

MAX338EPE+ - 8:1 400Ω Analog Multiplexer | Analog Devices

MAX338EPE+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX338CSE+ MAX338EPE+
ब्रांड Maxim Integrated Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन 8:1 analog multiplexer (or dual 4:1) —
Number of Channels 8 single-ended or 2x4 differential 8 inputs to 1 common output
On-State Resistance (RON) 400 ohm (max 650 ohm over signal) —
Single Supply Voltage +4.5 V to +30 V —
Dual Supply Voltage +/-4.5 V to +/-20 V —
Logic Compatibility TTL/CMOS compatible —
Channel Leakage Low-leakage CMOS, ~ nA typical —
Switching Action Break-before-make —
Address Lines 3-bit binary (A0, A1, A2) —
Enable Input Active-low EN —
On Time (tON) [DATA_NEEDED: ON switching time] —
Off Time (tOFF) [DATA_NEEDED: OFF switching time] —
ऑपरेटिंग तापमान 0 C to +70 C (commercial) [DATA_NEEDED: operating temperature range]
पैकेज 16-pin Narrow SOIC (NSOIC) 16-PDIP
माउंटिंग प्रकार Surface Mount Through-hole
RoHS स्थिति Compliant (Pb-free suffix '+') [DATA_NEEDED: RoHS status]
ESD Protection Yes (per datasheet) —
Product Type — 8:1 single-ended CMOS analog multiplexer
On-Resistance — 400 ohm
Address Control — 3-bit binary address
Number of Terminals — 16
Temperature Grade — Industrial
Technology — CMOS analog multiplexer
Switch Type — Single circuit IC switch
Signal Configuration — Single-ended
Leakage Characteristic — Low-leakage
सप्लाई वोल्टेज — [DATA_NEEDED: supply voltage]
Control Logic Levels — [DATA_NEEDED: control logic levels]
Bandwidth — [DATA_NEEDED: bandwidth]
Switching Time — [DATA_NEEDED: switching time]
इनपुट कैपेसिटेंस — [DATA_NEEDED: input capacitance]
आउटपुट कैपेसिटेंस — [DATA_NEEDED: output capacitance]
Off-Resistance — [DATA_NEEDED: off-resistance]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध