MAX3483ECPA+ vs MAX3483CPA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3483ECPA+ द्वारा Analog Devices और MAX3483CPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3483ECPA+ MAX3483ECPA+ - 12Mbps RS-485 Transceiver | Analog Devices

MAX3483ECPA+ - 12Mbps RS-485 Transceiver | Analog Devices

MAX3483ECPA+ ✓ सक्रिय
Analog Devices
MAX3483CPA+ MAX3483CPA+ - 3.3V 250kbps RS-485 Transceiver | Analog Devices

MAX3483CPA+ - 3.3V 250kbps RS-485 Transceiver | Analog Devices

MAX3483CPA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3483ECPA+ MAX3483CPA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-485/RS-422 transceiver RS-485/RS-422 transceiver
सप्लाई वोल्टेज 3.3 V 3.0 V to 3.6 V
Operating Supply Range 3 V to 3.6 V —
Maximum Data Rate 12Mbps —
ESD Protection ±15kV —
Driver Count 1 driver 1
Receiver Count 1 receiver 1
Supported Standards RS-485 and RS-422 —
Duplex Mode Half-duplex Half-duplex
Driver Edge Rate Slew-rate limited —
Package Type 8-pin PDIP through-hole package —
Total Pin Count 8 pins —
Production Status Production —
Datasheet Revision Revision 2 —
Temperature Range [DATA_NEEDED: operating temperature range] —
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Driver Output Voltage [DATA_NEEDED: driver output voltage] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
डेटा दर — 250 kbps
Receiver Hysteresis — 50 mV
Protocols — RS-422 and RS-485
Slew-Rate-Limited Driver — Yes
ऑपरेटिंग तापमान — 0C to 70C
माउंटिंग प्रकार — Through hole
पैकेज — 8-pin PDIP
Logic Direction — Single transmitter and single receiver
Driver Architecture — True differential RS-485/RS-422
EMI Behavior — Slew-rate limiting minimizes EMI
Cable Reflection Control — Slew-rate limiting helps reduce reflections
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध