MAX3483EESA+ vs MAX3483ECSA+ तुलना
विस्तृत दोनों ओर की तुलना MAX3483EESA+ द्वारा Analog Devices और MAX3483ECSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3483EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+ ✓ सक्रियAnalog Devices
MAX3483ECSA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483ECSA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3483EESA+ | MAX3483ECSA+ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3.0V to 3.6V | — |
| Nominal Supply Voltage | 3.3V | — |
| Maximum Data Rate | 12Mbps | 12 Mbps |
| ESD Protection | ±15kV | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Standards | RS-422 and RS-485 | — |
| Transceiver Configuration | 1/1 half-duplex transceiver | 1 driver / 1 receiver, half-duplex |
| Driver Slew Rate | Slew-rate limited | — |
| पैकेज | 8-pin SOIC | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| सप्लाई वोल्टेज | — | 3.3 V |
| Bus Standard | — | RS-485 and RS-422 |
| ESD Protection, Human Body Model | — | ±15 kV |
| ESD Protection, IEC 1000-4-2 Contact Discharge | — | ±8 kV |
| ESD Protection, IEC 1000-4-2 Air Gap Discharge | — | ±15 kV |
| Logic Compatibility | — | 3.3 V operation with 5 V logic interoperability |
| Transmitter Edge Rate | — | Slew-rate limited |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |