MAX3483ESA+ vs MAX3488CSA+ तुलना
विस्तृत दोनों ओर की तुलना MAX3483ESA+ द्वारा Maxim Integrated और MAX3488CSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3483ESA+ | MAX3488CSA+ |
|---|---|---|
| ब्रांड | Maxim Integrated | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| सप्लाई वोल्टेज | 3.3 V | 3.3 V |
| Verified Supply Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Interface Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | — |
| EMI Control | Slew-rate limitation reduces EMI and reflections | Slew-rate-limited driver intended to reduce EMI |
| Low-Speed Error-Free Transmission | Up to 250 kbps | — |
| Power Architecture | 3.3V-powered, low-power transceiver | — |
| पैकेज | 8-SOIC | 8-pin NSOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Operating Voltage | 3 V to 3.6 V | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| Receiver Output Type | [DATA_NEEDED: receiver output type] | — |
| Termination Requirement | [DATA_NEEDED: termination and biasing details] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Driver Edge Control | — | Slew-rate limited |
| Communication Standard | — | RS-485/RS-422 |
| Low-Power Family | — | 3.3 V, low-power transceiver |
| Cable Reflection Control | — | Slew-rate-limited driver intended to reduce reflections |
| Application Topology | — | RS-422 point-to-point and RS-485 multidrop |
| Differential Signal | — | Balanced line signaling |
| Logic Interface | — | Digital logic-level driver and receiver |
| Manufacturer Product Status | — | Production |
| Manufacturer Data Sheet Revision | — | Rev. 2 |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Typical Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Isolation | — | [DATA_NEEDED: isolation rating] |