MAX3485ECSA+ vs MAX3490AEGSA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3485ECSA+ द्वारा Analog Devices और MAX3490AEGSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ सक्रिय
Analog Devices
MAX3490AEGSA+ MAX3490AEGSA+ - 3.3V 20Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3490AEGSA+ - 3.3V 20Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3490AEGSA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3485ECSA+ MAX3490AEGSA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-485/RS-422 transceiver Full-duplex RS-485/RS-422 transceiver
Driver/Receiver Count 1 driver and 1 receiver —
सप्लाई वोल्टेज 3.3 V 3.3 V nominal
Maximum Data Rate 12 Mbps 20 Mbps
ESD Protection ±15 kV ±20 kV
Driver Edge Control Slew-rate limited —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
पैकेज 8-pin SOIC 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
Driver Output Current [DATA_NEEDED: differential output current] —
Receiver Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Driver Propagation Delay [DATA_NEEDED: driver propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] [DATA_NEEDED: common-mode voltage range]
Shutdown and Enable Control [DATA_NEEDED: DE and active-low RE control details] —
RoHS स्थिति unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification unknown —
Operating Supply Range — 3.0 V to 3.6 V
Driver Configuration — Slew-rate-limited
Number of Drivers — 1
Number of Receivers — 1
Communication Mode — Full duplex
Manufacturer — Analog Devices / Maxim Integrated
Product Lifecycle — Production
Receiver Fail-Safe Bias — [DATA_NEEDED: receiver fail-safe bias]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध