MAX3488ECPA+ vs MAX3488EEPA+ तुलना
विस्तृत दोनों ओर की तुलना MAX3488ECPA+ द्वारा Analog Devices और MAX3488EEPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX3488ECPA+ | MAX3488EEPA+ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| सप्लाई वोल्टेज | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | 12 Mbps |
| ESD Protection | ±15 kV | ±15 kV |
| Supported Standards | RS-422/RS-485 | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Driver Type | Slew-rate-limited true RS-485/RS-422 | — |
| Receiver Type | Differential RS-422/RS-485 receiver | — |
| पैकेज | 8-pin PDIP | 8-pin PDIP |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Shutdown Function | [DATA_NEEDED: shutdown function] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Tube Quantity | 1 tube | — |
| Interface Standards | — | RS-422 and RS-485 |
| Transceiver Count | — | 1 per device |
| Driver Count | — | 1 per device |
| Receiver Count | — | 1 per device |
| Driver Output Type | — | Slew-rate-limited true differential driver |
| पिन काउंट | — | 8 pins |
| Production Status | — | PRODUCTION |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| Driver Disable Time | — | [DATA_NEEDED: driver disable time] |
| Receiver Enable Time | — | [DATA_NEEDED: receiver enable time] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |