MAX3490EESA+ vs MAX3485ECSA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3490EESA+ द्वारा Analog Devices और MAX3485ECSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3490EESA+ MAX3490EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3490EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3490EESA+ ✓ सक्रिय
Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3490EESA+ MAX3485ECSA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 transceiver Half-duplex RS-485/RS-422 transceiver
सप्लाई वोल्टेज 3.3 V 3.3 V
Maximum Data Rate 12 Mbps 12 Mbps
ESD Protection ±15 kV ±15 kV
Driver Count 1 driver —
Receiver Count 1 receiver —
Communication Standards RS-485 and RS-422 —
Driver Type Slew-rate limited —
पैकेज 8-pin SOIC 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
Production Status Production —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: supply current] [DATA_NEEDED: typical and maximum supply current]
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] [DATA_NEEDED: common-mode voltage range]
Receiver Fail-Safe Behavior [DATA_NEEDED: receiver fail-safe behavior] —
Shutdown Function [DATA_NEEDED: shutdown function] —
RoHS स्थिति unknown unknown
REACH Status unknown unknown
AEC-Q100 Qualification unknown unknown
Driver/Receiver Count — 1 driver and 1 receiver
Driver Edge Control — Slew-rate limited
Supported Standards — RS-485 and RS-422
Driver Output Current — [DATA_NEEDED: differential output current]
Receiver Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Shutdown and Enable Control — [DATA_NEEDED: DE and active-low RE control details]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध