MAX3490EPA+ vs MAX3490CPA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3490EPA+ द्वारा Analog Devices और MAX3490CPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3490EPA+ MAX3490EPA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3490EPA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3490EPA+ ✓ सक्रिय
Analog Devices
MAX3490CPA+ MAX3490CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3490CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3490CPA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3490EPA+ MAX3490CPA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 full-duplex transceiver RS-485/RS-422 transceiver
Number of Drivers 1 —
Number of Receivers 1 —
Supply Voltage Range 3 V to 3.6 V 3.0 V to 3.6 V
डेटा दर 10 Mbps —
Supported Protocols RS-485 and RS-422 —
Duplex Mode Full duplex —
Driver Type Slew-rate-limited driver —
Driver Protection Short-circuit current limiting and thermal shutdown protection Short-circuit current limiting and thermal shutdown
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C —
पैकेज 8-pin PDIP 8-PDIP / DIP-8
माउंटिंग प्रकार Through hole Through-hole
Logic Compatibility [DATA_NEEDED: logic compatibility] —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Differential Input Impedance [DATA_NEEDED: differential input impedance] —
Driver Output Current [DATA_NEEDED: driver output current] [DATA_NEEDED: driver output current]
सप्लाई करंट [DATA_NEEDED: supply current] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] [DATA_NEEDED: AEC-Q100 qualification]
सप्लाई वोल्टेज — 3.3 V nominal
Maximum Data Rate — 10 Mbps
Driver Count — 1
Receiver Count — 1
Interface Standards — RS-422 and RS-485
Driver Output Type — True differential driver
Slew Rate — Slew-rate limited
Package Body Width — 7.62 mm (0.300 inch)
Receiver Fail-Safe — Fail-safe receiver feature
ऑपरेटिंग तापमान — [DATA_NEEDED: operating temperature range]
Absolute Maximum Supply Voltage — [DATA_NEEDED: absolute maximum supply voltage]
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध